PAGE 3
59401_IN_Rev A • Questions? (800) 234-6992 • RolaProducts.com
1
ENGLISH
ASSEMBLY INSTRUCTIONS
Bail Pin
TO ATTACH MAIN SUPPORT TUBE TO COLLAR BRACKET:
1. Pull bail pin from collar bracket (B).
FIG 1
.
2. Insert bushings (C) into main support tube (A). Then, connect main
support tube (A) to collar bracket (B) as shown in
FIG 1
. Align bushing
hole with lower hole in collar bracket and install one (1) ½-13x3-½” lg.
hex bolt (F), two (2) ½” flat washers (D), and ½” locknut (G) as shown.
Tighten ½” locknut until some resistance is felt when rotating main
support tube. Align remaining hole in main support tube with hole in
collar bracket and install bail pin.
Bushings
A
B
F
D
G
D
C
Lower
Hole
