48
SECTiON 10: OPTiONS FOR SYSTEM CONFiGURATiON
If you need to change your network settings or other system-level options, go to any Home
Menu and select “Change Library or Configuration”. Choose “System Configuration” at the
bottom of the next screen. You will see the following options:
Software Version & Updates:
This option shows you which software version you have on
SoundBridge and allows you to check if a newer version is available for download. SoundBridge
will notify you automatically when a new software update is available after coming out of
Standby mode or after accessing your “source” menu. Use this option to check for new software
manually.
Select Wi-Fi SSiD & Password:
This option allows you to check the name of the wireless
network to which you are connected and select another one. Use this option to enter your
network security key. See Appendix section “Wi-Fi Setup” for more information.
Show Wired Ethernet Status:
This option displays your connectivity status, IP address and
MAC address, among others.
Show Wi-Fi Status:
Displays Wi-Fi signal strength.
Network Control:
Enables or disables control of SoundBridge by a remote UPnP device.
Reset to Factory Defaults:
Reset to original factory settings. Important: This will erase all
Presets, Internet Radio favorites, network settings, and any other customizations made via the
Settings menu or web page.
Restart SoundBridge:
Power cycles SoundBridge and reboots the system.
Safe Mode
Safe Mode runs automatically in the unlikely event that Soundbridge software becomes
corrupted. While in Safe Mode you can download a new version of software from Roku or
restore factory settings. When Soundbridge enters Safe Mode, you will see the text “Safe
Mode” displayed superimposed over the Roku logo during the startup animation.
Section 10:
Options For System Configuration