Rokky Rokky Heat, Сборка и руководство по эксплуатации

Страница: 17 / 24

15
EN
TIME BOOSTER FUNCTION
FACTORY SETTINGS
It is a function for enabling the drying or heating-up room mode. After
switching on, the heater starts heating at 80% of its power, for a period
of time indicated by the user, from 30 minutes to 2.5 hours (5 settings
every 30 min). Note: the function is available only for rooms specified
in the application as „bathroom”.
To turn on the TIME BOOSTER function, press the „+” button on the
heater control panel for 5 seconds . After switching to this mode, you
can change the period of increased heating by pressing the „+” or „-”
keys. While the TIME BOOSTER mode is operating, a single LED will
flash. After the specified time has elapsed, the heater will return to its
original heating setting.
In the remote mode, the function is available only for rooms specified
in the application as „bathroom”.
To restore the radiator’s factory settings, press „-” button located on
the radiator control panel for 30 seconds.
Performing this function will remove the radiator from the Rokky
system. To reconnect the radiator to the system and application, the
configuration process described in the Rokky Startup guide must be
carried out.
To achieve the desired thermal comfort of the room, the appropriate
heating power level must be set. Choosing another, higher working
range causes the next diode to light up.