Rokky Rokky Heat, Сборка и руководство по эксплуатации

Страница: 13 / 24

11
EN
CONNECTING THE DEVICE
The electrical connection of the device is provided with 230 V, 50 Hz.
The device does not require and does not have an earthing conduc-
tor, therefore it is forbidden to attempt to earthing the device.
To connect the device to an electrical voltage:
1. Check whether the voltage in the network corresponds to the va-
lue indicated on the nameplate.
2. Plug in the cable which connects the electric cable to the mains
socket. Any modifications to the connecting cable are forbidden. If
you have a version with a power cord without a plug - connecting
the heater to the mains can only be done by a qualified installer.
3. The junction box or mains socket must be installed at least 10
cm above the floor. In rooms with high humidity, ie bathrooms or
kitchens, the electrical system should be equipped with a power
cut-off mechanism at all poles (differential fuse).