rojaflex HSR-1, Руководство по эксплуатации

Страница: 5 / 12

Function review
5
www.rojaflex.com
Depending on the switching frequency, we
recommend replacing the batteries at least
every 2 years.
LED
Channel display
K1 K2
UP
UP
Battery
compartment
STOP STOP
DOWN DOWN
DIP switch*
single/bi-
SI
directional
P2
Programming
BI
button
1 channel remote
controller HSR-1
5 channel remote
controller HSR-5
Individual
channels can be changed using
K1 and K2 buttons
When all 5 LEDs are lit, the group
control is active. All programmed
receivers are controlled
simultaneously.
The remote controller
back with a cover open
The “DIP switch” can be used to
choose between “SI” (single-
directional communication) and “BI”
(bi-directional communication),
depending on the receiver type (see
the receiver operating manual).
.
Battery installation/replacing
Depending on the transmitter model, the battery is delivered separately in the packaging, or is installed and
secured with a protective film against discharging. Open the back cover pressing it slightly down*, remove the
protective cover and install the battery (as shown) with the + (plus) side up. Then install the back cover.
Remove protective
film.
* Depending on a model, the
back cover can be held in place
with a screw.
The description of keys can differ, depending on a model:
K1= K- (minus) K2= K+ (plus)
Do not dispose of batteries together with
household garbage! Deliver to an appropriate
disposal site.