rojaflex HSR-1, Руководство по эксплуатации

Страница: 8 / 12

8
www.rojaflex.com
Programming and setup
Each time, the button must be pressed within 4 seconds!
Otherwise, the system will automatically leave the programming mode.
Check the operation by pressing UP/STOP/DOWN buttons.
When the drive moves in the opposite direction (the roller blind/drive moves down when the UP
button is pressed), restart the process and press the DOWN, not the UP button after pressing the
P2 button.
This way the drive direction is changed.
2.1 Remote controller assignment - HSR-5
By pressing the K2 or K1
button, select the required
channel (LED is lit).
Put the receiver (a
drive/external receiver)
into the programming
mode, as provided for in
the manual .
Press the programming
button P2
(on the back) twice.
Press the button UP once.
The drive (roller blind) will move UP/DOWN for a moment and/or the receiver will emit a sound.
OK–
First programming performed correctly
To assign
successive channels, repeat the entire procedure from the
start
When the group function is active (all LEDs are lit),
the channels cannot be assigned jointly or separately.
SI
P2
BI