5/14
User
’s Guide
RAGU V1.0 User’s Manual
© 2018 ROHM Co., Ltd.
No. 61UG032E Rev.001
Nov.2018
IV.
System Setup
General Setup
Figure 9. General Setup
Figure 10. Hardware parts
Component Descriptions
Motor
Stepping
Connectors
USB 2.0
(that is connected to PC)
AC adapter
Ribbon wire with connectors
RAGU DUT board
CLK-IN type
RAGU main board
RAGU-main1-EVK-001
RAGU option board
RAGU-op1-EVK-001
Table 1. Hardware parts
V.
Function
This section discusses the different function available for the
RAGU software.
Basic Drive
This is the basic function is included by default on the software.
It allows the user to use the basic drive features located on the
left side of the control software.
Figure 11. RAGU at startup
Dynamic Mode
This license allows the user to access the Dynamic Mode
window.
Figure 12. Dynamic Mode
Stepping Motor
AC adaptor
Connecting cable
RAGU DUT board
RAGU main board
RAGU option board
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
