9/14
User
’s Guide
RAGU V1.0 User’s Manual
© 2018 ROHM Co., Ltd.
No. 61UG032E Rev.001
Nov.2018
VII.
Using the Application and Its Tools
How to Use the Scope
Figure 21. Oscilloscope at startup
How to Use Dynamic Mode
Figure 22. Dynamic mode setting screen
Set desired drive settings.
Step
1
Ensure that scope is running.
Step
2
The captured waveforms will be displayed.
Step
3
User may use the other scope features such as: Channel
settings, Trigger & Cursor Measurement
See
Parts of the Control Software > Graph/Plot Area
and Oscilloscope Settings.
*
Click
Start
when ready,
Stop
to cancel,
Step
3
Set the cycle settings.
Step
2
User may also choose to
load
and
save
settings
via the
File
menu.
*
Input desired values in grid:
Time
Time when row of settings
will be implemented
VREF
Value in x.xx format
MTH
Value in x.xx format
CLK
Value in hertz [Hz]
PS
Value is either 1/0(H/L)
ENABLE
Value is either 1/0(H/L)
MODE0
Value is either 1/0(H/L)
MODE1
Value is either 1/0(H/L)
CW/CCW
Value is either 1/0(H/L)
User may select multiple cells to
copy/delete/paste for easy use.
User may also copy cells from MS Excel and
paste h
ere.
Step
1
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
