5 | Assembly
28 / 48
DURO-A RC
5.4
Assembly on Machine Spindle
§
The machine is switched off and protected against being switched on
again.
§
The machine spindle or intermediate plate is cleaned.
§
The cylinder or intermediate plate is checked for concentricity and axial
run-out.
1.
Disassemble the protective bushing.
2.
Move the draw tube into front position.
3.
Move the piston of the power chuck to rear position.
4.
Screw the crane lug into the power chuck.
5.
Correctly attach the load-bearing equipment to the crane lug.
6.
Position the power chuck on the machine spindle.
