Rohm DURO-A RC Скачать руководство пользователя страница 45

Страница: 45 / 48

Maintenance | 7

DURO-A RC

45 / 48

12. Remove bolt and pressure spring from the power chuck.

13. Remove pusher.

14. Remove wedge bars (1-3) from the power chuck from behind.

15. Remove the jaw bolts from the wedge bar with circlip pliers.

16. Remove drivers (1-3) from the power chuck.

17. Pull the piston out of the power chuck from behind.

18. Remove O-ring from the piston.

19. Remove the cylindrical pin and turn the turning bolt outwards.

20. Unscrew the conical lubricating nipple from the power chuck.

The power chuck is dismantled.

Replacement of wear parts

Check the dismantled power chuck for wear and damage.

Replace worn and damaged parts with OEM replacement parts.

Wear parts are replaced.

Cleaning the power chuck

Thoroughly clean the dismantled power chuck with a broom, brush or
cleaning cloth and free of grease residue, dirt and abrasion.

The power chuck is cleaned.

Cleaning with compressed air or a high-pressure cleaner is not permitted.

Assembly of the power chuck

The power chuck is assembled in reverse order.

Содержание DURO-A RC

















































Результаты поиска

Содержание DURO-A RC

Отзывы:

Похожие инструкции для DURO-A RC

Бренды по названию

Популярные бренды

Rohm DURO-A RC, Перевод оригинального руководства по эксплуатации

Результаты поиска

Содержание DURO-A RC

Отзывы:

Похожие инструкции для DURO-A RC

Бренды по названию

Популярные бренды