Rohde ELS 1000 S, Оригинальная инструкция по эксплуатации

Страница: 109 / 138

108 / 136 - EN -
Figure 20: ELS eDrive (switch cabinet & controls)
The controls are assigned as follows:
Figure 21: eDrive controls
The 2-hand operation means 2 keys must always be pressed with the left and right hand so that the ELS kiln floor can
be extended and retracted electrically:
Manual Operation Manual Operation
Left hand
Operates the “Retract floor” and “Extend
floor” keys on the side of the switch
cabinet.
Right hand
Operates the “Release” key on the front
of the switch cabinet.
Figure 22: 2-hand operation
*Depending on the version, the switch cabinet with the control keys can also be mounted on the right of the kiln, in which case it is operated using
the opposite hands.
10.2. ELS with 3-zone heating control
The ELS Frontloader can optionally be equipped with 3 heating zones.
⇒ A heating zone is an area in which the control system regulates the heating temperature according to the
running firing program. The actual firing chamber temperature is recorded by a separate thermocouple for each
heating zone.
If the ELS Frontloader is equipped with 3 heating zones, the zone control of the kiln control automatically regulates the
zone heating behaviour of the kiln according to the setpoint curve. This achieves an optimal temperature distribution.
Heating zone Description
1 Kiln ceiling heating zone
2 Middle heating zone
3 Kiln floor heating zone
Table 26: Allocation of heating zones
⇒
You must read the relevant instruction
manual for the control system carefully!
L R
Keys for extending and
retracting
“Release” key
Switch cabinet side Switch cabinet front
Release
Retract
floor
Extend
floor
or