Rohde & Schwarz ZVAX24 Скачать руководство пользователя страница 87

Страница: 87 / 145

R&S ZVAX24

Board Replacement

1312.7979.82 3.13

E-1

Replacing Options

(See Chapter 5, drawings 1311.2509.01 sheet 5, 1311.2509.01 S and 1311.2521 to 1311.2615)

Removing the Option

Turn off the instrument and disconnect from the mains, screw off the 4 rear-panel feet (580) and pull
off the enclosure (570) backwards.

Remove the front cover (540), see Replacing the Front Cover.
(only with option ZVAX-B291, -B292 or if one of the cables mounted on the front pannel has to be
replaced)

Use the relevant drawing to remove the option.

Fitting the new option

Reinstall the option by reversing the removal procedure.

Push the enclosure (570) back on and screw the 4 rear-panel feet (580) into position.

Connect the mains cable, turn on at the mains switch and press the ON key.

Change the config.ini file (see chapter 4)

Connect the R&S ZVAX with the R&S ZVA and switch on the option.

Check the corresponding LED.

Содержание ZVAX24


















































































































































Результаты поиска

Содержание ZVAX24

Отзывы:

Бренды по названию

Популярные бренды

Rohde & Schwarz ZVAX24, Руководство по обслуживанию

Результаты поиска

Содержание ZVAX24

Отзывы:

Бренды по названию

Популярные бренды