Rohde & Schwarz ZVAX24 Скачать руководство пользователя страница 83

Страница: 83 / 145

R&S ZVAX24

Board Replacement

1312.7979.82 3.9

E-1

Replacing the Fan

(See Chapter 5, Spare Parts List, Item

200 and drawing 1311.2509.01)

The fan is located under the power supply.

Opening the instrument and removing the fan

Turn off the instrument and disconnect from the mains, screw off the 4 rear-panel feet (580) and pull
off the enclosure (570) backwards.

Remove the srew (300) and the protection cover (290).

Disconnect the fan cable on the interface board.

Remove fan unit (200) by undoing the 4 screws (210).

Fitting a new fan and reassembling the instrument

Install the fan unit using the 4 screws (210).

N.B.:

The arrows on the fan show the installation position. The fan blows air into the instrument.

Route the fan cable so that it cannot get caught in the fan.

Connect the fan cable on the interface board (X601).

Refit the power supply

Connect the mains cable, turn on at the mains switch and press the ON key.

Check that the fan is operating correctly (fan is blowing air into the instrument).

Turn off the instrument and disconnect the mains cabling again.

Push the enclosure (570) back on and screw the 4 rear-panel feet (580) into position.

Connect the mains cable, turn on at the mains switch and press the ON key.

Содержание ZVAX24


















































































































































Результаты поиска

Содержание ZVAX24

Отзывы:

Бренды по названию

Популярные бренды

Rohde & Schwarz ZVAX24, Руководство по обслуживанию

Результаты поиска

Содержание ZVAX24

Отзывы:

Бренды по названию

Популярные бренды