Rohde & Schwarz ZNB20, Руководство пользователя

Страница: 567 / 1332

GUI Reference
R&S
®
ZNB/ZNBT
552 User Manual 1173.9163.02 ─ 38
For background information see Chapter 4.1.2, "Recall Sets" , on page 76.
5.15.1.1 Basic Recall Set Functions
To create a recall set based on the current analyzer configuration, select Save . To
open an existing recall set, select Open Recall... .
If the memory consumption of the VNA is too high, new setups can only be created (via
New or Open Recall... ) if the existing ones are closed. This is indicated by the following
dialog:
Run the Windows Task Manager to check the current memory consumption of the
Vna.exe
process and use the Save action to save unpersisted changes.
New
Creates a new recall set. The default names for recall sets are "Set1", "Set2" ... Recall
sets are accessible via tabs in the diagram area:
Tip: To open an existing recall set, use "Open Recall...". To rename a setup, use
"Save..."
File Softtool