Trying out the instrument
R&S
®
SGT100A
42
Getting Started 1419.4576.02 ─ 10
6.1
How to generate a CW signal
Configuring the R&S
SGT to generate a CW signal
Figure 6-1: Example of the setup
1. Check, that [POWER ON/STANDBY] key is green.
The key is on the front panel of the R&S
SGT.
2. On the connected remote PC, start the R&S SGMA-GUI software application.
The main panel of the application opens. The panel provides a quick access
to the main settings of the configured and activated instruments. The display
shows one row per instrument with the instrument-specific settings. The rows
comprise the instrument, the connection state, the used frequency and power
level, the state of the RF output and the modulator and the used reference fre-
quency source.
3. In the R&S SGMA-GUI main panel, the green indicator in front of the name of
the instrument confirms an active connection.
The software recognizes the instrument and displays the connection state
between the instrument and the remote PC.
4. In the R&S SGMA-GUI main panel, select the row of the instrument, that you
want to configure.
5. Select "Instrument Name > Preset" to restore the predefined instrument's set-
tings.
How to generate a CW signal
