Rohde & Schwarz SGT100A, Начало работы

Страница: 37 / 67

Instrument tour
R&S
®
SGT100A
37 Getting Started 1419.4576.02 ─ 10
USB IN
USB (universal serial bus) type Micro-B connector for remote control via various
external devices.
How to:
Chapter 4.13.4, "Connecting a controller via USB" , on page 31
DIG I/Q
Connector for the input of a digital I/Q signal from a Rohde & Schwarz instrument,
like a signal generator.
USER 1/2
"USER 1" is an SMB connector, "USER 2" is an SMA female connector.
Both connectors are multipurpose connectors for input signals and output signals,
e.g., for the following signals: "Trigger", "Marker 1/2", "Clock In/Out", "Sync In/
Out". Also, use the "USER 2" connector for input of an external pulse modulator
signal.
How to:
Chapter 4.8, "Connecting to RF 50
Ω
" , on page 19
RF 50Ω
SMA female connector for output of the RF signal.
How to:
Chapter 4.8, "Connecting to RF 50
Ω
" , on page 19
LO IN, LO OUT, REF IN, REF OUT
SMA female type connectors, for reference or local oscillator signals, and alterna-
tively also in MIMO setups.
Reference input and output:
●
"REF IN": Input for external reference signal.
●
"REF OUT": Output of internal reference signal.
Local oscillator input and output connectors:
●
"LO IN": Input for external LO signals
●
"LO OUT": Output of internal LO signals.
How to: "To connect to screwable connectors" on page 20
I/Q
SMA female connectors for input of external I/Q signals. The signals are fed
directly into the I/Q modulator.
How to:
"To connect to screwable connectors" on page 20
Rear panel tour