Rohde & Schwarz SGT100A, Начало работы

Страница: 39 / 67

Instrument tour
R&S
®
SGT100A
39 Getting Started 1419.4576.02 ─ 10
5.3.2 Rear panel
This section provides an overview of the connectors on the rear panel of the
extension unit.
For an overview of the connectors of the rear panel of R&S SGT, refer to Chap-
ter 5.2, "Rear panel tour" , on page 35.
4
1
2 3
Figure 5-4: Rear panel view of the R&S SGT and the connector extension unit
1 = R&S SGT rear panel, page 35
4 = REF IN, REF OUT, LO IN, LO OUT, page 39
3 = User 2, page 39
2 = I/Q, page 40
REF IN, REF OUT, LO IN, LO OUT
BNC type connectors, for reference signals or local oscillator signals, and alterna-
tively also in MIMO setups.
Reference input and output:
●
"REF IN": Input for external reference signal.
●
"REF OUT": Output of internal reference signal.
Local oscillator input and output connectors:
●
"LO IN": Input for external LO signals
●
"LO OUT": Output of internal LO signals.
How to: "To connect to screwable connectors" on page 20
User 2
BNC multipurpose connector for input and output signal, e.g., for the following
signals: "Trigger", "Marker 1/2", "Clock In/Out", "Sync In/Out".
Connector extension unit (R&S SGT-B88)