R&S SMA100A
Information on the Current Version and History
Release Notes for Firmware 1171.5360.52
9
– New selection
Write Nonvolatile Memory
: If it is set to disable, no data will be
written to the mass memory storage of the device.
– New selection
User Interface
: If it is set to disable, the display and the
keyboard of the R&S® SMA100A is locked. To unlock enter the security
password.
● LAN Services:
– New selection
Software Update
: If it is set to disable, the remote update via
LAN is disabled.
● Network Settings:
– New parameter
DNS Suffix
– New parameter
DNS Server
● RF Frequency Sweep, Level Sweep and LF Frequency Sweep:
– New parameter
Retrace
(only for sweep mode
Single
or
Extern Single
)
Modified Functionality
● The settings for instrument emulations are moved from the dialog Setup
Remote
Channel Settings to the new dialog Setup
Instrument Emulations
● Improved display update repetition rate
● For level values less than -120 dBm, the message “Level under range” appears.
● The folder /var/sma to save user data is not supported anymore and will be deleted
by the update process. All data stored in /var/sma will be moved to /var/user/.
Please use the folder /var/user to save user data in the future.
1.7 Version 2.20.470.33
Released: July 2013
New Functionality
● New remote control emulation HP 8657
● Added support of dual sine and noise waveform to remote emulation Agilent E4428
Fixed Issues
● R&S® SMA-B20 and R&S® SMA-B22: If FM modulation with Lf Gen 2 and shape
Square is active, the error message “
Synthesis extension: Overvoltage at external
modulation input detected
” appeared.
● In rare cases, the error message “
Verify failed during reading eeprom data from
device
” appeared.
