Rohde & Schwarz OSP-B011, Быстрый старт

Страница: 71 / 134

R&S OSP Getting Started
GUI Info Line
Quick Start Guide 1505.3896.62 - 14
71
Note that after defining the text or path info, you must update the GUI display. To do
so on the R&S OSP130, press the
STATUS
key on the front panel or switch to a
different menu and back. This switching can be done manually or via a VNC mode.
The R&S OSP120 allows activation or deactivation in the same way or via a
connected keyboard and monitor (or VNC).
When powering OFF/ON the R&S OSP130, the GUI info line remains active, but:

In case of text info, th
e text is set to the default content.”no customer-defined
info text”

In case of path info, the display may show “no pre-defined path”, if the current
path has become invalid. The same happens after any manual switching.
The following screenshots show
the GUI display with the custom text info line “this is a
test” or with the path info line “example path1”, respectively.
To deactivate the GUI info line, select the Info Line Mode “OFF”.
An activated GUI info line is updated every two seconds.