manualshive.com logo in svg

Rohde & Schwarz DVS SpycerBox Flex, Руководство по оборудованию, Страница: 18 / 76

Поделиться
Скачать
Rohde & Schwarz DVS SpycerBox Flex Скачать руководство пользователя страница 18

1-8

SpycerBox Ultra/Flex Hardware Guide

Product Disposal (B2B)

Used electrical and electronic products should not be dis-
posed of with general household waste. At the end of its 
service life you may return the DVS product after appro-
priate prior notification to either your local distributor or 
DVS in Germany. DVS will then take the device free of 
charge to a waste disposal organization which will recy-
cle and reuse it environmental friendly.

General Notes

Please observe the following general important notes:

Leave about 10 to 15% of the overall main storage capacity 
empty of data for performance reasons.

Your DVS system has been tested thoroughly and is very reli-
able. However, because of the vast amount of third-party soft-
ware available, its reactions on the installation of such could 
not be tested. The installation of third-party software may dis-
rupt the real-time capability and/or limit the functionality of 
your system.

Содержание DVS SpycerBox Flex













































































Отзывы:

Нет отзывов