Operating the instrument
R&S
®
RTP
63
Getting Started 1803.6478.02 ─ 01
Tap the icon. Select the source in the sidebar, or tap diagram with the waveform
to be transformed. The diagrams are created from the selected waveform.
Delete
Removes waveforms, measurements, zoom, histograms, mask segments
and other elements from the display.
Tap the icon and then tap the element to be deleted, or the waveform to be
switched off.
6.7
Displaying results
The results of measurements, mask tests, searches, protocol decoding and oth-
ers are displayed immediately. There are several places to display the results:
●
In a table that is docked below the diagram (only for measurement and
decode results)
●
In a floating result box in front of the diagrams, which you can move on the
display
●
In a minimized view (result icon) on the signal bar
●
In a separate tab that can be arranged similar to a diagram
The default position and the font size can be adjusted.
To define the default position of measurement results
For results of automatic, cursor and protocol measurements and for decode
results, the docked table below the diagram is the initial default position.
To change the default position of the results:
► Open the "Menu" > "Settings" > "Appearance" dialog.
● Automatic measurements: select "Measurement" tab > "Result position".
● Cursor measurements: select "Cursor" tab > "Result position".
● Protocols: select "Protocol" tab > "Result position".
Mask test and search results are always shown in a floating result box, which you
can drag to a convenient position using the SmartGrid.
Displaying results