manualshive.com logo in svg

Rohde & Schwarz 1803.7000K04, Начало работы, Страница: 62 / 79

Поделиться
Скачать
Rohde & Schwarz 1803.7000K04 Скачать руководство пользователя страница 62

Operating the instrument

R&S

®

RTP

62

Getting Started 1803.6478.02 ─ 01

FFT

Transforms a waveform to the frequency spectrum by fast Fourier trans-

form (FFT). The FFT trace is shown in a new diagram.
Tap the icon and adjust the settings in the overlay menu. Select the source of the
spectrum in the overlay menu. The FFT diagram is created from the selected
waveform.
To adjust FFT settings, double-tap the FFT diagram.

Annotate

Defines a waveform label that names or explains the waveform. Tap the

icon and then tap the waveform to be labeled. Enter the label text using the on-
screen keyboard. The text is shown in the same color as the waveform. If you tap
the display background, the label is assigned to the focused waveform. You can
drag the label to another position.

Save Reference

Copies the selected source waveform with all its settings to the reference

waveform. If the acquisition is running, the reference waveform is a snapshot.
You can configure up to four reference waveforms.
Tap the icon, and select the required reference waveform (R1 to R4) in the over-
lay menu. Tap the waveform to be copied.

Save Waveform

Exports the waveform data to file using the settings defined in "Menu" >

"Save/Recall" > "Save" tab > "Waveform" > "Setup" tab.
The filename is created according to the autonaming pattern.
Tap the icon and then tap the waveform to be exported. If you tap the display
background, the focused waveform is exported, or a multichannel export is per-
formed if configured.

Zone trigger

Defines a zone trigger, which combines the trigger condition with the inter-

section or non-intersection of one or more zones or masks.
Tap the icon and then tap the corner points of the zone on the screen. Tap "Finish
zone". You can add more zones to the trigger condition.

Spectrogram (option R&S RTP-K37)

Starts an FFT and the spectrogram. The FFT trace and the spectrogram

are shown in separate diagrams.

Toolbar

Содержание 1803.7000K04
















































































Отзывы:

Нет отзывов