Remote Control
R&S
®
NRT2
176
User Manual 1178.5550.02 ─ 04
Example:
SYSTem:ERRor:CODE:ALL?
Queries all entries in the error queue.
Response: 0
No errors have occurred since the error queue was last read out.
Usage:
Query only
SYSTem:ERRor:CODE[:NEXT]?
Queries the oldest entry in the error queue and then deletes it. Only the error number
is returned and not the entire error text.
Example:
SYSTem:ERRor:CODE
Queries the oldest entry in the error queue.
Response: 0
No errors have occurred since the error queue was last read out.
Usage:
Query only
SYSTem:ERRor:COUNt?
Queries the number of entries in the error queue.
Example:
SYSTem:ERRor:COUNt
Queries the number of entries in the error queue.
Response: 1
One error has occurred since the error queue was last read out.
Usage:
Query only
SYSTem:ERRor[:NEXT]?
Queries the error/event queue for the oldest item and removes it from the queue. The
response consists of an error number and a short description of the error.
Positive error numbers are instrument-dependent. Negative error numbers are
reserved by the SCPI standard.
Example:
SYSTem:ERRor?
Queries the oldest entry in the error queue.
Response: 0, 'no error'
No errors have occurred since the error queue was last read out.
Usage:
Query only
SYSTem:HCOPy
[<filename>]
Triggers a screenshot (hardcopy) of the current display. If a filename is given, this is
used as a target file. Otherwise an internal name is generated which can be read by
the query function.
Parameters:
<filename>
SYSTem
