Preparing for Use
R&S
®
FSVA/FSV
45
Quick Start Guide 1321.3066.02 ─ 06
When a USB device is then disconnected from the R&S
FSVA/FSV, Windows
immediately detects the change in hardware configuration and deactivates the
corresponding driver.
All USB devices can be connected to or disconnected from the instrument during
operation.
Connecting a memory stick or CD-ROM drive
If installation of a memory stick or CD-ROM drive is successful, Windows informs
you that the device is ready to use. The device is made available as a new drive
and is displayed in Windows Explorer. The name of the drive depends on the
manufacturer.
Connecting a keyboard
The keyboard is detected automatically when it is connected. The default input
language is English – US.
Select "Start > Settings > Time & language > Region & language > Add a lan-
guage" to configure the keyboard language. To access the Windows operating
system, press the Windows key on the external keyboard.
Connecting a mouse
The mouse is detected automatically when it is connected.
Select "Start > Settings > Devices > Mouse & touchpad" to configure the mouse
properties. To access the Windows operating system, press the Windows key on
the external keyboard.
Connecting a printer
When printing a file, the instrument checks whether a printer is connected and
turned on and whether the appropriate printer driver is installed. If necessary,
printer driver installation is initiated. You only have to install a printer driver once.
To install a printer, select "Start > Settings > Devices > Add a printer or scanner".
To access the Windows operating system, press the Windows key on the external
keyboard.
You can load updated and improved driver versions or new drivers from an instal-
lation disk, USB memory stick or another external storage medium. If the instru-
ment is integrated in a network, you can also install driver data stored in a net-
work directory.
Connecting USB Devices
