MCX102-BRD Operating Manual
04.12.2020
4/12
Fig. 2 MCX102-BRD installation
Installation guidelines
All electrical connections should be done with disconnected power supply.
If the expander and controller are not supplied from the same PSU then GND terminals of both
devices must be connected with any wire.
3.
O
PERATION SCENARIOS
In typical scenario of operation, MCX102-BRD expander is used to control single door by MC16 controller.
The expander is mainly dedicated to operation with PRT series readers. In case of Wiegand interface
reader, only single such terminal can be connected to the expander in order to control read-in door.
