MCT64E MCT66E Operating Manual
09.07.2020
5/15
Fig. 3 Tamper loop example
Outputs
Terminals offer 2 transistor open collector type outputs (15V/1A rated) and 1 relay output with NO/NC
contacts (30V/1.5A DC/AC rated). Electric parameters such as polarity are configured within low level
configuration (RogerVDM). Function are assigned to outputs within high level configuration (VISO). Multiple
functions with different priorities can be assigned to the same output at the same time.
Identification
Depending on the version, following user identification methods are offered by terminals:
EM125kHz (UNIQUE) proximity cards
PINs
EM125kHz cards
EM125kHz proximity cards are widely used in office buildings. If it is necessary to ensure higher level of
security then MIFARE card readers e.g. MCT12M are recommended.
The technical characteristics of the device are guaranteed for RFID cards supplied by Roger. Cards from
other sources may be used, but they are not covered by the manufactures warranty. Before deciding to use
specific Roger products with third-party contactless cards, it is recommended to conduct tests that will
confirm satisfactory operation with the specific Roger device and software in which it operates.
PINs
MCT64E-IO accepts variable length PINs (by default 4-8 digits concluded with [#] key).
2.
I
NSTALLATION
Table 3. Screw terminals
Name
Description
12V+
12VDC power supply
12V-
Ground
IN1
IN1 input line
IN2
IN2 input line
IN3
IN3 input line
