Cerber
®
C41V1/Cerber
®
C41V4
H
OOKUP
I
NSTALLATION
& P
ROGRAMMING
B
OOK
5
INSTALLING AND COMMISSIONING
P
ANEL
M
OUNTING
Select a dry location close to an unswitched AC source allowing ground
connection. If the system also sends vocal messages, the location must be
close to a telephone dose.
Remove the printed circuit board and mount the cabinet securely to the wall
using 4 screws. Mount the PCB into the cabinet. Pull all cables into the
cabinet and prepare them for connection.
K
EYPAD
M
OUNTING
The keypad should be located close to the designed Entry/Exit door and
mounted at a convenient height for all users.
Disassemble the keypad and mount the backplate on the wall. Pull the
keypad wiring inside the keypad and prepare it for connection.
W
IRING
NOTE: Complete all wiring to the control panel before applying it to
battery or AC power.
Wiring should be made according to one of the next diagrams, depending on
the selected type: Cerber C41V1 or Cerber C41V4.
