14
I)
Micro input
Balanced microphone input. To obtain good signal quality, you have to use a microphone with
balanced output. The use of a microphone without balanced output is also possible.
J)
PHONO input
Phono input with a sensitivity of 5.2mV and built in RIAA correction.
-20
+20
-18
-16
-14
-12
-10
-8
-6
-4
-2
-0
+2
+4
+6
+8
+10
+12
+14
+16
+18
d
B
r
20
20k
50
100
200
500
1k
2k
5k
10k
Hz
K)
Asymmetrical master output 1
Asymmetrical output to connect a power-amplifier. The output level can be manipulated with
master fader 1 (19) from 0 to maximum (0.775V).
L)
Second headphones connector
Signal identical as headphones-output on the frontpanel (31). The specifications are the same
as the headphones output on the frontpanel.
M)
Effects IN/OUT 2
In- and output to connect effect equipment to the music signal. The signal that will run through
this connector is controlled by the input channel effects assign potentiometer (5) or main mix
effects assign potentiometer (26). Internally linked when JACK is not inserted. Sensitivity
775mV.
N)
Alarm / music mute in connector
Optional 4-pole connector to mute or turn off the music signal remote controlled. The DJ
microphone signal will keep on working normally when the music is muted by the signal on this
connector.
O)
Priority signal input
Optional input to connect a signal coming from an evacuation-message player, alarm-signal
generator, etc. This signal can be played at the moment when the other music signals are
muted by the signal on the alarm / music mute connector.