Roda RD10 HB, Руководство пользователя

Страница: 6 / 53

RD10 HB Manual
Page 6
Please note
: If possible use a appropriate stylus pen to operate the touch screen to avoid display pol-
lution or scratches.
The touch screen can be cleaned with a clean, soft cloth. Mild class cleaner may be sprayed on the
cloth.
Do not apply a class cleaner on the touch screen directly. Always apply it on the cloth.
Attention: Do not use strong or caustic cleaners. Those cleaners can damage the optical coating of the
touch screen.
At ambient temperatures of +60°C or above limited and partial pillowing of the touch screen foil may
occur. This is not an unusual behaviour and almost always reverses when the temperature drops.
Environmental Information
The equipment that you bought has required the extraction and use of natural resources for its produc-
tion. It may contain hazardous substances for the health and the environment.
In order to avoid dissemination of those substances in our environment and to diminish the pressure on
the natural resources, we encourage you to use the appropriate take back systems. Those systems will re-
use or recycle most of the materials of your end life equipment in a sound way.
The cross-bin symbol invites you to use those systems.
If you need more information on the collection, reuse and recycling sys-
tems, please contact your local or regional waste administration.
Transporting the display
• Shut down the display.
• Disconnect the AC/DC adapter and all peripherals from the display.
• Close all interface covers.
• If available use a carrying bag or transport box when transporting the device.
Cleaning the display
• Switch off the display and pull the power plug of the AC/DC adapter from the electrical outlet.
• Clean the display with a water-damp cloth. You may use a mild glass cleaner for the screen: spray a
small amount of the class cleaner onto a soft, lint-free cloth and carefully wipe the screen with the
cloth.
• Do not use strong or caustic cleaners.
• An air gun is recommend for cleaning water and dust. For salty water please clean with fresh water
then blow dry with an air gun. Be sure not to turn the display up side down while water is being
applied.