Roda RD10 HB, Руководство пользователя

Страница: 16 / 53

Introduction RD10 HB Manual
Page 16
1.2.6 Upper side view
Figure 8: Upper side view
OSD menu keys:

Leave menu/sub menu (“Esc”)

Menu navigation right/increase value

Menu navigation left/reduce value

Confirm input (“Enter”)
1.3 Commissioning
• Remove the RD10 HB from the packaging and set it on a surface with the bottom side facing up.
• If appropriate attach the RD10 HB to the fitting mounting solution. Screws (M6 for mounting) are
not part of the standard RD10 HB scope of delivery.
• Make sure to fasten the screw with appropriate force to not damage the threads.
• 230 V AC operation: Plug the line cable into an electrical outlet. Plug the MIL plug of the AC/DC
adapter into the DC input of the display and tighten the knurled screw.
• 18-32 V DC operation: Connect the DC/DC adapter to the DC power supply and connect the DC plug
with the DC-In of the RD10 HB.
• The DC-In is coded. It is not possible to misapply the DC plug.
• Connect a VGA(RGB) or DVI cable to the display and the signal source.
• Turn the display ON by pressing the power button for approx. 5 seconds. The power LED will light
up green.
• If the display shows a “no signal” message, check the cable connections and the settings of the
signal source.