Rockwell ShopSeries RS8000, Руководство пользователя

Страница: 10 / 13

Chain Saw Sharpener en
9
SYMbOLS TeChniCaL SpeCifiCaTiOnS
Rated voltage
Rated power
No load speed
Grinding disk diameter(outside)
Grinding disk diameter(inside)
Machine weight
OperaTing inSTruCTiOnS
nOTe: Before using the tool, read the
instruction book carefully.
iMpOrTanT! Switch the chain grinder off
immediately if the grinding disc vibrates.
Check that the chain grinding is correctly assembled
and that the grinding disc is not damaged.
Never try to stop the grinding disc with your hands!
Do not touch metal filings until they have cooled. Do
not leave the chain grinder until the grinding disc
has come to a complete standstill. Please note that
it takes a little while for the grinding disc to come
to a complete standstill after you have switched the
chain grinder off.
aSSeMbLY
iMpOrTanT! Before you assemble the tool,
check the accessories according above
information; make sure the accessories are
completed.
nOTe: This may already be pre-fitted to the tool.
However the following instructions give full
assembly details.
1. Loosen the four screws on the cover. (See Fig.
A1)
2. Catch the inner flange and loosen the outer
flange counter-clockwise. (See Fig. A2)
3. Place the grinding disc on the tool spindle.
Ensure it is correctly located. Then fit the outer
flange making sure it is in the correct direction,
tighten it clockwise. (See Fig. A3)
4. Fix the cover (5) and the protective shield (7).
(See Fig. A4)
OperaTing inSTruCTiOnS
preparaTiOnS
Attach the base (14) to the workbench using suitable
bolts in the mounting holes (17). The lock knob (18)
must jut out over the edge of the table and be easily
To reduce the risk of injury, user must read
instruction manual
Warning
Wear dust mask
Wear eye protection
Wear ear protection
Double insulation
RCM approval mark
230-240V~50Hz
200W
7000/min
104mm
22mm
1.9kg