Rockwell ShopSeries RS8000, Руководство пользователя

Страница: 8 / 13

Chain Saw Sharpener en
7
Use good quality accessories marked with a well-
known brand name. Choose the type according
to the work you intend to undertake. Refer to the
accessory packaging for further details. Store
personnel can assist you and offer advice.
SafeTY inSTruCTiOnS
warning! When using electric tools basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and personal
injury including the following.
read all these instructions before attempting to
operate this product and save these instructions.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Safe OperaTiOn
1. Keep work area clear
- Cluttered areas and benches invite injuries.
2. Consider work area environment
- Do not expose tools to rain.
- Do not use tools in damp or wet locations.
- Keep work area well lit.
- Do not use tools in the presence of flammable
liquids or gases.
3. Guard against electric shock
- Avoid body contact with earthed or grounded
surfaces {e.g. pipes, radiators, ranges,
refrigerators).
4. Keep other persons away
- Do not let persons, especially children, not
involved in the work touch the tool or the
extension cord and keep them away from the
work area.
5. Store idle tools
- When not in use, tools should be stored in a dry
locked-up place, out of reach of children.
6. Do not force the tool
- It will do the job better and safer at the rate for
which it was intended.
7. Use the right tool
- Do not force small tools to do the job of a heavy
duty tool.
- Do not use tools for purposes not intended; for
example do not use circular saws to cut tree
limbs or logs.
8. Dress properly
- Do not wear loose clothing or jewellery; they can
be caught in moving parts.
- Non-skid footwear is recommended when
working outdoors.
- Wear protective hair covering to contain long
hair.
9. Use protective equipment
- Use safety glasses.
- Use face or dust mask if working operations
create dust.
10. Connect dust extraction equipment
- If the tool is provided for the connection of dust
extraction and collecting equipment, ensure
these are connected and properly used.
11. Do not abuse the cord
- Never yank the cord to disconnect it from the
socket Keep the cord away from heat, oil and
sharp edges.
12. Secure work
- Where possible use damps or a vice to hold the
work. It is safer than using your hand.
13. Do not overreach
- Keep proper footing and balance at all times.
14. Maintain tools with care
- Keep cutting tools sharp and clean for better and
safer performance.
- Follow instruction for lubricating and changing
accessories.
- Inspect tool cords periodically and if damaged
have them repaired by an authorized service
facility.
- Inspect extension cords periodically and replace
if damaged.
- Keep handles dry, clean and free from oil and
grease.
15. Disconnect tools
- When not in use, before servicing and when
changing accessories such as blades, bits and
cutters, disconnect tools from the power supply.
16. Remove adjusting keys and wrenches
- Form the habit of checking to see that keys and
adjusting wrenches are removed from the tool
before turning it on.
17. Avoid unintentional starting