Rockwell RG8166, Руководство пользователя

Страница: 11 / 16

11
18V 250MM GRASS TRIMMER EN
Double insulation (for charger)
Fuse
RCM marking
ABN: Australian Business Number. By this number,
business information such as entity type, status,
business location etc. can be found at website http://
abr.business.gov.au.
ABN of Positec Australia Pty Limited is 14 101 682 357
TECHNICAL DATA
RG8166 RG8166.9
Charger Input
(RW9897)
100-240V~50/60Hz,
70W
/
Charger Output
(RW9897)
20V 2500mA /
Charging time
(RW9894)
1hr /
Battery capacity
(RW9894)
2.0 Ah Li-ion /
Voltage 18V
No Load Speed 8500/min
Cutting Diameter 250mm
Line Diameter 1.65mm
Machine Weight 1.91kg 1.55kg
Charger
Protection class
/II
/
OPERATION INSTRUCTIONS
NOTE: Before using the tool, read the instruction book
carefully.
Intended Use
The machine is intended for the cutting of grass and
weeds under bushes, as well as on slopes and edges
that cannot be reached with the lawn mower.
ASSEMBLY
1. ASSEMBLY OF AUXILIARY HANDLE (SEE FIG. A1, A2)
Insert the shaft onto the upper housing. Hand
grabbing area should face down(See B1). Attach
the screw to the housing unit, and then to the knob.
Finally, rotate the knob until it is hand tight. (See Fig.
B2).
Note: Make sure that the handle is firmly locked in
place.
2. ASSEMBLY OF THE SAFETY GUARD (SEE FIG. B1, B2,B3)
Remove the screw (c) from the guard. (See B1) Attach
the safety guard to the trimmer head. Align the guard
so it slides into the slots located on the trimmer head.
(See B2) Secure the safety guard onto the trimmer
head with the screw (a).
OPERATION INSTRUCTIONS
WARNING! The charger and battery pack are
specially designed to work together so do not
attempt to use any other devices. Never insert or allow
metallic objects into your charger or battery pack
connections because of an electrical failure and
hazard will occur.
1. BEFORE USING YOUR CORDLESS GRASS TRIMMER
The battery pack included is shipped UNCHARGED.
You must charge before first use.
The battery charger supplied was designed to only
charge the Li-on battery also supplied. Do not use
another battery charger.
2. CHARGER (RW9897)
CHARGING THE BATTERY PACK (SEE FIG. C1, C2, C3)
NOTE:
a) Do not use any charger other than that specifically
provided for use with the equipment.
b) If the battery pack is very hot you must remove
your battery pack from the charger and allow time
for the battery to cool down before recharging.
T 3.15A