Rockwell PowerFlex 7000, Справочное руководство

Страница: 53 / 68

Rockwell Automation Publication SYSLIB-RM056B-EN-P - February 2017 53
PowerFlex 7000 Drive (P_PF7000)
The following table lists the functions on the Engineering tab page 2.
Mode Configuration Display
This display lets you select the default mode for the object by selecting the
appropriate mode.
You must have FactoryTalk View security code E to select the default mode on
this display.
Table 17 - Engineering Tab Page 2 Description
Function Action Security Configuration Parameters
Click to navigate to the Mode
Configuration display. None See Mode Configuration display on
page 53
Description Type the device description to show
on the faceplate title bar.
Engineering
Configuration
(Code E) Cfg_Desc
Label Type the label to show on the Graphic
Symbol.
Cfg_Label
Tag Type the tag name to show on the
faceplate title bar and in the Tooltip.
IMPORTANT: Pausing the mouse
over these fields displays a tool tip
with the configured Logix tag/path.
Cfg_Tag
Forward and
Reverse Text Type the text to display on the
faceplate to indicate the direction of
the drive.
• Cfg_FwdText
• Cfg_RevText
Clear Program
Commands on
Receipt Check to use Edge-triggered Program
Commands (default).
Clear the checkbox to use
Level-triggered Program Commands. Cfg_PCmdClear
Operator command
resets fault Check to permit the Operator Start or
Stop command to reset any previous
faults (I/O Fault, Fail to Start, Fail to
Stop, Interlock Trip), then start or
stop the motor.
Clear this checkbox if a reset is
required to clear faults.
Cfg_OCmdResets
Drive can be jogged Check to enable Jog on the Operator
tab so that the drive can be jogged
from the faceplate. Cfg_HasJog
IMPORTANT
If no mode is being requested, changing the default mode changes the mode
of the instruction.