Rockwell Automation COLLINS MP-20, Руководство оператора

Страница: 9 / 26

9
412Y-2 battery charger
A portable battery charger, with a cover, that allows up to six 612A-1 Batteries to be
charged or discharged simultaneously. It operates with 28 volts dc power or
110 volts ac power. A simple internal wiring change permits Operation on 220-V ac
power.
886B-1 generator
A hand-operated generator that can be latched between the receiver-transmitter
and the battery to extend the operating time indefinitely. The charging current is
about 125 mA at cranking speeds that can be maintained by the operator for 15
minutes.
Nonrechargeable battery
The nonreehargeable battery is a dry expendable battery that can directly replace
the 612A-1 Battery.
Operating configurations and options
The accessory components may be used with the 719D-2A Receiver-Transmitter
Group to produce operating configurations for various missions. Options that must
be considered in selecting the proper configuration include: type of input power,
mission duration, transmission range, stationary or mobile use, one or two man
operation and weather conditions.
Standard two-person configuration
The standard configuration consists of the 719D-2A Receiver-Transmitter Group
and 612A-1 Battery installed in the 963A-l Radio Set Harness. The 938A-2 Antenna
is connected to the antenna connector and the H-189/GR Handset is connected to an
audio connector. This configuration may be used during mobile missions of up to 12
hours operating time and distances up to 25 kilometers (15.5 miles). Normally, two
persons are required; one to carry the unit, the other to operate the controls from
the rear.
Single operator configuration
The 377L-2 Receiver-Transmitter Control can he clipped onto the operator's belt
using the 540K-1 Control Extender. This makes it possible for one person to operate
the 719D-2A Receiver-Transmitter Group while carrying it.