Rockwell Automation COLLINS MP-20, Руководство оператора

Страница: 13 / 26

13
F . The field pack is attained to the rear and bottom of the pack frame. Refer to
Figure 7. Place the metal rings, on rear of field pack, over the two hooks on the rear
of the pack frame. Insert the webbing straps, on the field pack, through the
openings near the hooks, through the buckles, and pull tight. Secure the bottom
straps on the field pack through the openings on the bottom of the frame, and pull
tight.
Figure 7. Attaching Field Pack to Pack Frame
719D-2A receiver-transmitter group
To prepare Receiver – Transmitter for operation, proceed as follows.
A . Secure either the 377L-2 Receiver-Transmitter Control or the 540K-1 Control
Extender to the 671V-2 Receiver-Transmitter using four screws. Ensure that their
mating connectors are aligned and mated before tightening the screws.
B . Secure the 548A-2 Amplifier-Coupler to the 671 V-2 Receiver Transmitter using
the four latches: two on the bottom, an adjustable one in front, and an adjustable
one in rear. Ensure that their mating connectors are aligned and mated before
engaging the latches.
C . Slide assembled 719D-2A Receiver-Transmitter Group into the 963A-1 Radio Set
Harness from the top. Secure receiver-transmitter to pack frame by engaging and
tightening the four spring-1oaded cam latches, two on each side.