Rockwell Automation Allen-Bradley 871FM-M10BA30-x, Руководство пользователя, Страница: 22 / 90

22 Rockwell Automation Publication 871FM-UM002A-EN-P - April 2017
Chapter 3 871FM Miniature Metal Flat Pack with
IO-Link O
verview
Automatic Device
Configuration (ADC)
Replacing damaged sensors is easy. Simply remove the original Allen-Bradley
sensor and connect the new sensor (with the same catalog number) — the
controller automatically downloads the configuration to the new sensor.
Upon failure, a sensor can be replaced with the same catalog number that is
defined in the IO-Link channel sensor. Upon connecting the new sensor, the
configuration is automatically downloaded.
No personal computer is required to configure the sensor, unless the setting
requires changing. The IO-Link channel configuration is stored within the
Logix controller.
Tag Naming for I/O Data: Rockwell Automation system solutions provide
tag names that are based on the Allen-Bradley sensor connected. I/O data is
converted, formatted, and named based on the Allen-Bradley sensor applied.
Reduces commissioning time by the OEM and reduces troubleshooting time
by the end user when searching for sensor data. Consistent naming techniques
are used.
The Triggered and Margin Status that is previously shown are examples of
consistent tag names that are used across all Allen-Bradley sensors. These tags
give insightful and descriptive meaning to the operation of the sensor output.
The tags can change depending on the type of sensor being used and the
functionality within the sensor.