Rockwell Automation 9VT201-007HTNNN, Руководство пользователя, Страница: 61 / 224

Start Up 2-5
Publication 9VT-UM001D-EN-P
Table 2.A Quickstart Parameters
If your application requires adjustment to parameters beyond those listed
in table
Table 2.A , you can adjust the parameters in any or all of the next
6 selections in the Start-Up menu, or you can adjust parameters
individually through the Parameters menu.
When you have completed adjusting all of the parameters in the Start-Up
routines that your application requires, select the last item in the menu,
Done.
Important: The drive is shiped with a default configuration of control
from the keypad. For drive control from the terminal block
inputs, parameter 89, Logic Source Sel, must be set to 0.
Exiting Before Completing the Start-Up Routines
To exit the Start-Up routines, press the F4 key (Exit). When you
select the Start-Up icon from the main menu again, you will be
prompted to either continue or restart the Start-Up routines. If
you select “continue,” you will be returned to the point at which
you exited.
Parameter No. Parameter Name
155 Stop Mode A
42 Motor NP FLA
81 Minimum Speed
82 Maximum Speed
140 Accel Time 1
142 Decel Time 1
90 Speed Ref A Sel
362 Digital In2 Sel