Rockwell Automation 1738-AENTR Скачать руководство пользователя страница 24

Publication 1738-IN028B-EN-E - February 2010

Supersedes Publication 1738-IN028A-EN-E - April 2009

Copyright © 2010 Rockwell Automation, Inc. All rights reserved.

Rockwell Automation Support

Rockwell Automation provides technical information on the Web to assist you in using 
its products. At 

http://support.rockwellautomation.com

, you can find technical 

manuals, a knowledge base of FAQs, technical and application notes, sample code and 
links to software service packs, and a MySupport feature that you can customize to 
make the best use of these tools.
For an additional level of technical phone support for installation, configuration, and 
troubleshooting, we offer TechConnect support programs. For more information, 
contact your local distributor or Rockwell Automation representative, or visit 

http://support.rockwellautomation.com

.

Installation Assistance

If you experience a problem within the first 24 hours of installation, please review the 
information that's contained in this manual. You can also contact a special Customer 
Support number for initial help in getting your product up and running.

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational 
when shipped from the manufacturing facility. However, if your product is not 
functioning and needs to be returned, follow these procedures.

Allen-Bradley, Rockwell Automation, TechConnect, and ArmorPoint are trademarks of Rockwell Automation, Inc.

 

Trademarks not belonging to Rockwell Automation are property of their respective companies..

United States

1.440.646.3434

 

Monday – Friday, 8 a.m. – 5 p.m. EST

Outside United States

Please contact your local Rockwell Automation representative for any 
technical support issues.

United States

Contact your distributor. You must provide a Customer Support case number 
(see phone number above to obtain one) to your distributor in order to 
complete the return process.

Outside United States

Please contact your local Rockwell Automation representative for the return 
procedure.

Содержание 1738-AENTR

























Отзывы: