48
Step 4
Step 5
Step 6
Turn the P
ARAMETER
A
DJUST
control to scroll through the available parameters for the current
configuration.
Turn the P
ARAMETER
S
ELECT
control one step clockwise to display the parameter that is
currently mapped to the NUMB 1 control number.
After selecting the desired controller number, press the S
TORE
button to save the number for
the NUMB 1 parameter. "STORED" will flash briefly on the display.
STORED
PARA1
OUTPUT
PARA1
REVERB LVL
Step 7
After selecting the parameter that you which to assign to a controller, press the S
TORE
button
to save it. The Taboo Twin will flash "STORED" briefly.
STORED
Step 3
Use the P
ARAMETER
A
DJUST
control to select the controller number to be assigned to the
PARA 1 parameter. Any number from 0 to 120 may be selected, as well as OFF (will not
respond to MIDI control changes). Match the number selected for this parameter with the
controller number on the MIDI transmitter.
NUMB 1
7
The Taboo Twin allows you to select an upper and lower value limit which the parameter cannot exceed. For
example, if a parameter has a value range from -
∞
to 0dB, yet you would like the range of the parameter to vary from
only -12dB to -2dB, you may set a lower limit of -12 and an upper limit of -2 via the Upper and Lower Limit param-
eters. When a parameter is stored in the Controller Assign function (Step 7), the maximum parameter value is
automatically stored as the upper limit, while the minimum value is stored as the lower limit.