39
SOURCE 2
The SOURCE 2 parameter is used to select whether the Source 2 input will be the VOICE 2 output
from the previous effect in the signal chain or the direct signal (DIR).
DLY HF
The DELAY HIGH FREQUENCY DAMPING parameter controls the amount of high frequency
DAMP
content in the delayed and regenerated signals. Higher amounts of damping will result in less
high frequency information in the delayed signal.
OUT LEVEL 1
The OUTPUT LEVEL 1 parameter determines the volume of Delay 1 in relation to Delay 2.
PAN 1
The PAN 1 parameter allows you to pan the Delay 1 signal to the left or right channel.
DLY TIME 1
The DELAY TIME 1 parameter determines the length of time (in milliseconds) after the input
signal that the Delay 1 signal will begin. The DELAY TIME can be adjusted via the ADJUST
control, MIDI controller changes or via the Tap Delay feature (see "Operating the Taboo Twin"
for detailed descriptions of each).