background image

23

GLOBAL Function

The first function displayed when turning the F

UNCTION

 S

ELECT

 control is the Global function. The parameters provided in

this function affect all presets (i.e. the settings stored for these parameters are the same for all presets).

The P

ARAMETER

 S

ELECT

 control will allow you to access the following Global parameters:

Parameter

Description

OUTPUT

The OUTPUT parameter determines the output configuration of the Taboo Twin. It is important
that this parameter is set correctly

In most situations, this parameter should be set to STEREO. When set to STEREO, one speaker
of the Taboo Twin provides the left channel output, while the other speaker provides the right
channel output.

When MONO is selected, the left and right outputs of the Taboo Twin are summed together,
and the same mono signal is fed through both speakers of the Taboo Twin, as well as each of
the outputs.

When using the Taboo Twin with an additional powered cabinet, it is common to set this
parameter to LEFT. When set to LEFT, both speakers of the Taboo Twin provide only the left
channel output, while the tip connection from the rear panel SEND jack provides the right
channel signal to be fed to the separate powered cabinet (see pages 15-16 for more information).
Note that this configuration requires a specially configured cable.

HUSH

The HUSH OFFSET parameter allows you to globally (all presets) adjust the HUSH

®

 Expander

OFFSET

Threshold. This means that if this parameter is altered from 0dB to +3dB, the Expander Thresh-
old will be 3dB higher for all presets. This feature can be useful when switching from a quiet
guitar with passive electronics to a noisy guitar with active electronics - as the active guitar
would require a higher Threshold level in all presets.

MUTE

The MUTE parameter allows you to mute the output of the Taboo Twin. This feature is espe-
cially useful when changing guitars during a live set. If a Rocktron All Access

 is used in

remote mode with the Taboo Twin, a single All Access button can be configured as a momen-
tary switch which will mute the output when it is held down. (See "Using a Taboo Twin with a
Rocktron All Access in REMOTE mode"
 in Chapter 7 for more information.)

Содержание TABOO TWIN












































































Отзывы: