20
Bearing Removal - Shaft Eyelet
Damper Body Eyelet:
Damper Body Eyelet:
Clamp the eyelet securely in aluminum or plastic
Clamp the eyelet securely in aluminum or plastic
vise blocks. Position the eyelet securely on a flat surface.
vise blocks. Position the eyelet securely on a flat surface.
Shaft Eyelet:
Shaft Eyelet:
Position the eyelet securely on a flat surface. To prevent
Position the eyelet securely on a flat surface. To prevent
damage to the air valve, remove the bearing on the side opposite of
damage to the air valve, remove the bearing on the side opposite of
the air valve first.
the air valve first.
Position the punch through one bearing and against the back of the
Position the punch through one bearing and against the back of the
opposite bearing. Press the end down against the outside bearing to
opposite bearing. Press the end down against the outside bearing to
secure it.
secure it.
Tap the bearing out with two to three taps, then rotate to a new
Tap the bearing out with two to three taps, then rotate to a new
position around the bearing. Repeat until the bearing is pushed out
position around the bearing. Repeat until the bearing is pushed out
evenly on all sides.
evenly on all sides.
The center spacer will also be removed.
The center spacer will also be removed.
2
Hammer / Mallet
Bearing punch 1/8" / 3 mm (OD)
