12
Specifications subject to change without notice
S
PECIFICATIONS
MODEL- Type RF 2-Channel
X1
X2
X3
Continuous Power Rating (RMS) - Measured at 12.6 Battery Volts
4
Ω
Load Per Channel
25 Watts x 2
50 Watts x 2
75 Watts x 2
2
Ω
Load Per Channel
50 Watts x 2
100 Watts x 2
150 Watts x 2
4
Ω
Load Bridged (mono)
100 Watts x 1
200 Watts x 1
300 Watts x 1
Dimensions:
Height
3.175" (8.07cm)
3.175" (8.07cm)
3.175" (8.07cm)
Width
11.6" (29.46cm)
11.6" (29.46cm)
11.6" (29.46cm)
Length
15.09" (38.33cm)
17.59" (44.68cm)
20.09" (51.03cm)
Battery Fuse Rating (Amp)
30A
50A
80A
(External to Amplifier)
Not Supplied
Not Supplied
Not Supplied
Fuse Type
AGU
AGU
AGU
Signal-to-Noise Ratio
>93dB A-weighted
Crossover Slope
48dB/octave
Crossover Frequency
All Pass/Low Pass/High Pass/Direct
Crossover Frequency
variable from 50Hz to 350Hz
Frequency Response
20Hz to 20kHz ±0.5dB
Bandwidth
20Hz to 22kHz ±3dB
Damping Factor @ 4
Ω
(at output connector )
>200
Slew Rate
30 Volts/ms
IM Distortion (IHF)
<0.05%
Acceptable Signal Voltage Range
Variable from 100mV to 6.5V (RCA Input)
Protection
NOMAD - Internal analog-computer output protection
circuitry limits power in case of overload. Thermal
switch shuts down the amplifier in case of overheating.
Input Impedance
20k ohms
A
CCESSORIES
Connecting PUNCH Capacitors
Maintain the power you need to your Type RF Amplifier.
Color Options
Personalize your Type RF amplifier by changing the top and corner plastics to different colors.
Available through our web site or local retailer.
See our website for other accessories to help you get the most out of your system.
www.rockfordfosgate.com – password TYPERFUSA to access the Type RF page.