cobas c
111 Installation Manual
04906900001
INSTALLATION-MANUAL
cobas c
111
Version 3.0
Page 6 of 43
2.
About this manual
This manual is to be used for unpacking, installing and registering the
cobas c
111. For
detailed instrument information, see the
cobas c
111 Operator’s Manual.
2.1
Conventions used in this manual
The conventions used in this manual are as follows:
1., 2., 3., represents sequential steps in a procedure. You should follow these
steps in order.
2.1.1
Symbol listing
Caution: Refer to
accompanying documents.
Manufacturer of device
These symbols are
provided on the type
plate of the instrument
Electrical and electronic equipment marked with this
symbol are covered by the European directive WEEE.
The symbol denotes that the equipment must not be
disposed of in the municipal waste system.
(WEEE = Directive 2002/96/EC of the European Parliament and the
council of 27 January 2003 on waste electrical and electronic
equipment.)
2.1.2
Abbreviations
The following abbreviations are used:
Units
cm
Centimeters
in
Inches
Ib
Pounds (weight)
psi
Pounds per square inch
VA
Volt- Amperes
VAC
Volts (alternating current)
M
Ω
Megohm (10
6
ohms)
