Rocal ARc 100 Скачать руководство пользователя страница 15

Страница: 15 / 64

6.1 Maintenance.

An appropriate and regular maintenance of both the appliance and the installation contributes greatly to its good

performance. It is important to perform periodic and complete controls of the equipment, ceramic rope joints, the ducts and installation.
Thus, for your safety and comfort,

some of our dealers offer a servicing contract for your device. Please contact your dealer

for this service.

6.1.1 Locking mechanisms.

You need to make sure no mechanisms are locked (registers, door, air inlet, etc.) after an extended

shutdown period.

6.1.2. Spare parts.

Use only original spare parts, or parts recommended by Manufacturas Rocal, S.A. See picture on section “V” of

the ANNEXED document.

6.2. Cleaning.

It is important for the appliance to be clean of ash so that all mechanisms work properly. To clean the body of the

device

use the cleaning dry cloth given with the appliance or similar. Do not use current cleaning products

6.2.1 Glass.

You must turn the device off to clean the glass. The products used must not come into contact with the metal parts of

the door or the ceramic board; the aggressiveness of these products can cause a corrosion process of the equipment. To replace the

glass follow the steps described in the "D.23" and "D.24" images on the ANNEXED document.

6.2.2 Ash box.

Empty the box only when the appliance is completely turned off,

ensuring that the ashes do not contain any

burning coals

; in which case you should deposit them in a metal bucket. To access the ash basin follow the steps shown in pictures

D.1” and “D.5” of the ANNEXED document.

6.2.3. Flue liner.

It is important to keep the flue liner clean. It gets dirty depending on the fuel used, on a slower or faster combustion,

etc. You need to clean the flue liner at least once per season. It is mandatory for a specialist to review it periodically. To access the
flue liner follow the steps shown in pictures “D.9”, “D.10” and “D.11” of the ANNEXED document.

6.2.4. Painting.

The heat-resistant paint that covers the whole device (the combustion chamber, the interior, the front door, the

frame which covers the joints, etc.), resists up to 600ºC of temperature and releases a slight characteristic odor that disappears with
the first ignitions. It is necessary to regularly check the condition of the paint and correct it when necessary.
This paint can be damaged when; the temperature exceeds 600ºC, fuels with too much humidity or non-recommended fuels are
used, it is installed in humid environments and / or salinity in the environment (seawater), it is in contact with chemical cleaning
products or with water (inputs through the duct, etc.).

Use exclusively "Rocal heatproof spray paint”.

Rocal offers various optional items, contact your local dealer to purchase these items. Some of the items are shown below:

Item

Code

Description

ECOntrol

C7005

Intelligent combustion control

Regulator

REGULAD-1

Fan speed controller

Adapter to 4 sides frame