Robust 43.452.82, Оригинальная инструкция по эксплуатации

Страница: 17 / 44

17
GB
2. Layout and items supplied
(Fig. 1/2/3/16)
2.1 Layout
1. Setting knob for the chip depth
2. Dust
bag
3. Safety lock-off
4. ON/OFF switch
5. Rear base plate
6. Belt
cover
7. Chip ejector
8. Front base plate
9. Changeover switch for chip ejector
10. Power cable
11. Thumb screw for step depth scale
12. Step depth scale
13. Parallel stop
14. Parking soleplate
2.2. Items supplied
n
Open the packaging and take out the equipment
with care.
n
Remove the packaging material and any
packaging and/or transportation braces (if
available).
n
Check to see if all items are supplied.
n
Inspect the equipment and accessories for
transport damage.
n
If possible, please keep the packaging until the
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
n
Hand-held electric plane
n
Dust bag
n
Parallel stop
n
Wrench
n
Original operating instructions
n
Safety instructions
3. Proper use
The hand-held electric plane is designed for planing,
rabating and chamfering pieces of wood.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage: 230 V ~ 50 Hz
Power input: 900 W
Idling speed: 16,500 min -1
Chip depth: 0-3 mm
Rebate depth: 0-15 mm
Plane width: 82 mm
Protection class: II /
쏾
Weight: 3.1 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level 90.4 dB(A)
K
pA
uncertainty 3 dB
L
WA
sound power level 101.4 dB(A)
K
WA
uncertainty 3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Vibration emission value a
h
= 3,955 m/s 2
K uncertainty = 1,5 m/s 2
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equipment
is used and may exceed the specified value in
exceptional circumstances.
The specified vibration value can be used to compare
the equipment with other electric power tools.
The specified vibration value can be used for initial
assessment of a harmful effect.
Anleitung_RB_PL_900_SPK7__ 17.07.12 11:05 Seite 17