background image

GENERAL INFORMATION 

This  manual  is  integral  part  of  the  machine  follow  strictly  the 
instructions  given  in  this  Manual  prior  to  positioning  and 
operating the blower. 
For  a  quick  and  rational  reading  of  this  manual  observe  the 
following statements and definitions : 

Warning  :  Signals  the  risk  of  serious  physical 
dangers to people and/or serious danger to blower
 

Note  :  Signals  important  technical  information  for 
the operation of the blower
 

Qualified personnel 
It  means  these  persons  who,  on  account  of  their  training, 
experience  and  instruction  and  their  knowledge  of  relevant 
standards,  specifications,  accident  prevention  rules  and 
operating  conditions,  have  been  authorized  by  those 
responsible  for  the  safety  of  the  plant  to  carry  out  the 
necessary  work  on  the  blower    and  who  can  recognize  and 
avoid any possible dangers. 

Acknowledge  of  first  aid  is  also  required  as  is  information 
about local rescue facilities. 

The  blower  is  a  rotary  lobe  compressor  suitable  only  for 
industrial use as described in this Manual. 
Any  other  use  is  to  be  considered  improper  and  is 
therefore forbidden. 

The  blower  must  be  installed  in  a  safe  area,    accessible  only 
by qualified personnel

Warning  :  Non-qualified  personnel  are  not 
permitted to work on or near the blower
 

The  personnel  in  charge  must  be  well  acquainted  with  this 
Manual,  and  then  conserve  carefully  the  Manual  in  a  known 
site in order that it is available for future consultations. 

The maintenance operations are to be carried out by qualified 
personnel
  following  the  instructions  given  in  this  Manual  and 
using only original spare parts. 

www.fraserwoods.ca

Содержание RB-DV 65/V





















Отзывы: