35
6.6 Spare parts
In the table below are indicated the recommended spare parts for normal use of the blower according the
forecast timing.
For the spare parts of the blower refer to the drawings at pages 37and 38.
Pos.
Description
Operation
Start-up
2 year
5 year
10 year
11 A - B
Gears (couple)
-
-
-
1
16 A - B
Lubricating disc (couple)
-
-
-
1
20
Sealing chamber (set)
-
-
-
1
23 A - B - C Oil splash disc (set)
-
2
4
8
25
Sealing spacers (set)
-
1
2
4
26
Nut (couple)
-
-
1
2
27 A
Nut (RB-DV 115 – 225)
-
-
1
2
31 - 32 - 33 Bearing (set)
-
-
1
2
37
Shaft sleeve
1
2
4
8
43
Seal ring
1
2
4
8
45
Flexible piston rings (set)
-
1
2
4
50
Gaskets (set)
1
2
4
8
63 - 63 A
Compensating ring (set)
-
1
2
4
75 - 76 - 77 Oil draining plugs (set)
1
2
4
8
78
Oil level plugs (set)
1
2
4
8
In case of order please quoting always Type, serial number and year of construction of the blower (these
elements are indicated in front page of this manual) and relevant position of spare part indicated in the table
Warning : Do not use non-original spare parts or accessories .
Note : ROBUSCHI will not be liable for any damage, breakdown, and injury deriving from the use
of non-original spare parts or accessories
6.7 Demolition of the blower
In case of demolition of the blower verify the eventual presence of explosive, toxic or dangerous substances
and dispose them in accordance with local regulations.
Warning : Dispose the used oil in accordance with local regulations.
Warning : Dispose the filter element in accordance with local regulations.
Demolish the blower in such a way to make impossible to use again ROBOX as complete unit, or to use
again one or several parts of the blower.
Note : Destroy the nameplate of the blower and any other document
www.fraserwoods.ca
