Robur GAHP A indoor, Инструкция по установке, использованию и техническому обслуживанию

Страница: 36 / 40

Diagnostics
36
8
Code Description Warning (u) Error (E)
478 High hot water delivery temperature
Reset is automatic when the triggering condi-
tion ceases.
NA
479 Heating antifreeze function activated
Non-blocking Warning (informative code).
The code clears automatically when antifreeze
function execution ends.
NA
80/480 Incomplete functional parameters Contact the TAC.
481 Invalid bank 1 parameters
Reset is automatic when the triggering condi-
tion ceases.
Contact the TAC.
482 Invalid bank 2 parameters
Reset is automatic when the triggering condi-
tion ceases.
Contact the TAC.
484 Transformer or 24 Vac fuse fault NA Contact the TAC.
485
Invalid module type configuration
parameters
NA Contact the TAC.
486 ROM board fault NA Contact the TAC.
487 pRAM board fault NA Contact the TAC.
488 xRAM board fault NA Contact the TAC.
489 Registers board fault NA Contact the TAC.
490 Outdoor temperature probe fault NA
Reset may be performed from the DDC/CCI or from the S61
board (menu 2, parameter 21).
If the code persists, shows up again or in case of doubt, contact
the TAC.
491 Electronic board fault NA Contact the TAC.
NA: Not Applicable